sivasoft interview questions

sivasoft interview questions

Spring Interview Questions

1.  What is IOC (or Dependency Injection)?
A. The basic concept of the Inversion of Control pattern (also known as dependency injection) is that you do not create your objects but describe how they should be created. You don't directly connect your components and services together in code but describe which services are needed by which components in a configuration file. A container (in the case of the Spring framework, the IOC container) is then responsible for hooking it all up.

i.e., Applying IoC, objects are given their dependencies at creation time by some external entity that coordinates each object in the system. That is, dependencies are injected into objects. So, IoC means an inversion of responsibility with regard to how an object obtains references to collaborating objects.

2. What are the different types of IOC (dependency injection) ?
A. There are three types of dependency injection: 
     1.Constructor Injection (e.g. Pico container, Spring etc): Dependencies are provided as constructor parameters.
     2.Setter Injection (e.g. Spring): Dependencies are assigned through JavaBeans properties (ex: setter methods).
    3.Interface Injection (e.g. Avalon): Injection is done through an interface.
Note: Spring supports only Constructor and Setter Injection

3. What are the benefits of IOC (Dependency Injection)?
A. Benefits of IOC (Dependency Injection) are as follows:
   a.Minimizes the amount of code in your application. With IOC containers you do not care about how services are created and how you get references to the ones you need. You can also easily add additional services by adding a new constructor or a setter method with little or no extra configuration.
   b.Make your application more testable by not requiring any singletons or JNDI lookup mechanisms in your unit test cases. IOC containers make unit testing and switching implementations very easy by manually allowing you to inject your own objects into the object under test.
   c.Loose coupling is promoted with minimal effort and least intrusive mechanism. The factory design pattern is more intrusive because components or services need to be requested explicitly whereas in IOC the dependency is injected into requesting piece of code. Also some containers promote the design to interfaces not to implementations design concept by encouraging managed objects to implement a well-defined service interface of your own.

4. What is Spring ?
A. Spring is an open source framework created to address the complexity of enterprise application development. One of the chief advantages of the Spring framework is its layered architecture, which allows you to be selective about which of its components you use while also providing a cohesive framework for J2EE application development. 

5. What are the advantages of Spring framework?
A. The advantages of Spring are as follows: 
       a. Spring has layered architecture. Use what you need and leave you don't need now. 
       b. Spring Enables POJO Programming. There is no behind the scene magic here. POJO programming enables continuous integration and testability.
       c. Dependency Injection and Inversion of Control Simplifies JDBC.
       d. Open source and no vendor lock-in.

6. What are features of Spring ?
A. Lightweight : spring is lightweight when it comes to size and transparency. The basic version of spring framework is around 1MB. And the processing overhead is also very negligible.
    Inversion of control (IOC) : Loose coupling is achieved in spring using the technique Inversion of Control. The objects give their dependencies instead of creating or looking for dependent objects.
    Aspect oriented (AOP) : Spring supports Aspect oriented programming and enables cohesive development by separating application business logic from system services.
    Container : Spring contains and manages the life cycle and configuration of application objects.

7. How many modules are there in Spring? 
A. 1.The core container
     2.Spring context
     3.Spring AOP
     4.Spring DAO
     5.Spring ORM
     6.Spring Web module
     7.Spring MVC framework

8. What are the types of Dependency Injection Spring supports?
A. a)Setter Injection:
Setter-based DI is realized by calling setter methods on your beans after invoking a no-argument constructor or no-argument static factory method to instantiate your bean.
     b)Constructor Injection:
Constructor-based DI is realized by invoking a constructor with a number of arguments, each representing a collaborator.

9. What is Bean Factory ?
A. A BeanFactory is like a factory class that contains a collection of beans. The BeanFactory holds Bean Definitions of multiple beans within itself and then instantiates the bean whenever asked for by clients.

10. What is Application Context?
A. A bean factory is fine to simple applications, but to take advantage of the full power of the Spring framework, you may want to move up to Springs more advanced container, the application context. On the surface, an application context is same as a bean factory.Both load bean definitions, wire beans together, and dispense beans upon request. 

11. What is the difference between Bean Factory and Application Context ?  
A.  a. Application contexts provide a means for resolving text messages, including support for i18n of those messages.
     b. Application contexts provide a generic way to load file resources, such as images. 
     c. Application contexts can publish events to beans that are registered as listeners. 
     d. Certain operations on the container or beans in the container, which have to be handled in a programmatic fashion with a bean factory, can be handled declaratively in an application context. 
     e. ResourceLoader support: Spring’s Resource interface us a flexible generic abstraction for handling low-level resources. An application context itself is a ResourceLoader, Hence provides an application with access to deployment-specific Resource instances. 
     f. MessageSource support: The application context implements MessageSource, an interface used to obtain localized messages, with the actual implementation being pluggable.

12. What are the common implementations of the Application Context ?
A.  a. ClassPathXmlApplicationContext : It Loads context definition from an XML file located in the classpath, treating context definitions as classpath resources.
      b. FileSystemXmlApplicationContext : It loads context definition from an XML file in the filesystem. 
      c. XmlWebApplicationContext : It loads context definition from an XML file contained within a web application.

13. How is a typical spring implementation look like ?
A. For a typical Spring Application we need the following files:
     1. An interface that defines the functions.
     2.An Implementation that contains properties, its setter and getter methods, functions etc.,
     3.Spring AOP (Aspect Oriented Programming)
     4.A XML file called Spring configuration file.
     5.Client program that uses the function.

14. What is the typical Bean life cycle in Spring Bean Factory Container ?
A. 1.The spring container finds the bean’s definition from the XML file and instantiates the bean. 
     2.Using the dependency injection, spring populates all of the properties as specified in the bean definition.
     3.If the bean implements the BeanNameAware interface, the factory calls setBeanName() passing the bean’s ID. 
     4.If the bean implements the BeanFactoryAware interface, the factory calls setBeanFactory(), passing an instance of itself. 
     5.If there are any BeanPostProcessors associated with the bean, their post- ProcessBeforeInitialization() methods will be called.
     6.If an init-method is specified for the bean, it will be called.
     7.Finally, if there are any BeanPostProcessors associated with the bean, their postProcessAfterInitialization() methods will be called.

15. What do you mean by Bean wiring ?
A. The act of creating associations between application components (beans) within the Spring container is reffered to as Bean wiring.

16. What do you mean by Auto Wiring?
A. The Spring container is able to autowire relationships between collaborating beans. This means that it is possible to automatically let Spring resolve collaborators (other beans) for your bean by inspecting the contents of the BeanFactory. The autowiring functionality has five modes.
       1. no
       2. byName
       3. byType
       4. constructor
       5. autodirect

17. What is DelegatingVariableResolver?
A. Spring provides a custom JavaServer Faces VariableResolver implementation that extends the standard Java Server Faces managed beans mechanism which lets you use JSF and Spring together. This variable resolver is called as DelegatingVariableResolver.

18. How to integrate  Java Server Faces (JSF) with Spring? 
A. JSF and Spring do share some of the same features, most noticeably in the area of IOC services. By declaring JSF managed-beans in the faces-config.xml configuration file, you allow the FacesServlet to instantiate that bean at startup. Your JSF pages have access to these beans and all of their properties.

19. What is  Java Server Faces (JSF) - Spring integration mechanism? 
A. Spring provides a custom JavaServer Faces VariableResolver implementation that extends the standard JavaServer Faces managed beans mechanism. When asked to resolve a variable name, the following algorithm is performed:
       a. Does a bean with the specified name already exist in some scope (request, session, application)? If so, return it.
       b. Is there a standard JavaServer Faces managed bean definition for this variable name? If so, invoke it in the usual way, and return the bean that was created. 
       c. Is there configuration information for this variable name in the Spring WebApplicationContext for this application? If so, use it to create and configure an instance, and return that instance to the caller.
       d. If there is no managed bean or Spring definition for this variable name, return null instead.
       e. BeanFactory also takes part in the life cycle of a bean, making calls to custom initialization and destruction methods.

20. What is Significance of JSF- Spring integration ?
A. Spring - JSF integration is useful when an event handler wishes to explicitly invoke the bean factory to create beans on demand, such as a bean that encapsulates the business logic to be performed when a submit button is pressed. 

21. How to integrate your Struts application with Spring?  
A. To integrate your Struts application with Spring, we have two options: 
      1. Configure Spring to manage your Actions as beans, using the ContextLoaderPlugin, and set their dependencies in a Spring context file.
      2. Subclass Spring's ActionSupport classes and grab your Spring-managed beans explicitly using a getWebApplicationContext() method. 

22. What are ORM’s Spring supports ? 
A. Spring supports the following ORM’s : 
      1. Hibernate
      2. iBatis 
      3. JPA (Java Persistence API) 
      4. TopLink
      5. JDO (Java Data Objects)
      6. OJB

23. What are the ways to access Hibernate using Spring ?
A. There are two approaches to Spring’s Hibernate integration:
       a. Inversion of Control with a HibernateTemplate and Callback 
       b. Extending HibernateDaoSupport and Applying an AOP Interceptor.

24. How to integrate Spring and Hibernate using HibernateDaoSupport?
A.  Spring and Hibernate can integrate using Spring’s SessionFactory called LocalSessionFactory. The integration process is of 3 steps.
      a. Configure the Hibernate SessionFactory 
      b. Extend your DAO Implementation from HibernateDaoSupport
      c. Wire in Transaction Support with AOP 

25. What is AOP?
A. Aspect-oriented programming, or AOP, is a programming technique that allows programmers to modularize crosscutting concerns, or behavior that cuts across the typical divisions of responsibility, such as logging and transaction management. The core construct of AOP is the aspect, which encapsulates behaviors affecting multiple classes into reusable modules. 

26. How the AOP used in Spring?
A. AOP is used in the Spring Framework: To provide declarative enterprise services, especially as a replacement for EJB declarative services. The most important such service is declarative transaction management, which builds on the Spring Framework's transaction abstraction.To allow users to implement custom aspects, complementing their use of OOP with AOP. 

27. What do you mean by Aspect ? 
A. A modularization of a concern that cuts across multiple objects. Transaction management is a good example of a crosscutting concern in J2EE applications. In Spring AOP, aspects are implemented using regular classes (the schema-based approach) or regular classes annotated with the @Aspect annotation (@AspectJ style). 

28. What do you mean by JointPoint? 
A. A point during the execution of a program, such as the execution of a method or the handling of an exception. In Spring AOP, a join point always represents a method execution. 

29. What do you mean by Advice?
A. Action taken by an aspect at a particular join point. Different types of advice include "around," "before" and "after" advice. Many AOP frameworks, including Spring, model an advice as an interceptor, maintaining a chain of interceptors "around" the join point. 

30. What are the types of Advice? 
A. Types of advice: 
      a. Before advice: Advice that executes before a join point, but which does not have the ability to prevent execution flow proceeding to the join point (unless it throws an exception). 
      b. After returning advice: Advice to be executed after a join point completes normally: for example, if a method returns without throwing an exception.
      c. After throwing advice: Advice to be executed if a method exits by throwing an exception.
      d. After (finally) advice: Advice to be executed regardless of the means by which a join point exits (normal or exceptional return).
      e. Around advice: Advice that surrounds a join point such as a method invocation. This is the most powerful kind of advice. Around advice can perform custom behavior before and after the method invocation. It is also responsible for choosing whether to proceed to the join point or to shortcut the advised method execution by returning its own return value or throwing an exception.

No comments:

Post a Comment